| | Amplification AccessoriesOnline Catalogue | Amplification | Amplification Accessories  | | This universal, ultra-compact 2-channel footswitch is an ideal accessory for stage and studio applications. Use it on gear featuring external control functions such as guitar amps, keyboards, rhythm machines, lighting products and so on. You can easily switch between two input signals into one output or vice versa (e.g. switch between two guitars using one amplifier or two amplifiers with one guitar). Latching/non-latching modes are selectable for both channels:
- Non-latch mode momentarily engages the switch while you hold down the pedal - Latch mode changes the On/Off status each time you press the pedal
Weve relied on relay switching technology for ultra-high impedance and highest signal integrity. There are dedicated LED indicators for precise status control, and you can combine multiple AB200s by using the side-mount interlock. You will need one 9 V battery for operation (not included). Ultra-compact and universal 2-channel footswitch for stage and studio applications Usable for all products with external control functions such as guitar amps, keyboards, rhythm machines, lighting products, etc. Easily switch between two input signals into one output or vice versa (e. g. switch between two guitars using one amplifier or two amplifiers with one guitar) Programmable latching/non-latching modes selectable for both channels: ---Non-latch mode momentarily engages the switch while you hold down the pedal ---Latch mode changes the on/off status each time you press the pedal Relay switching technology for ultra-high impedance and signal integrity Dedicated LED indicators for precise status control Combine multiple AB200's together by using the side-mount interlock Runs on 9 V battery (not included) High-quality component components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
|
|  |  | | When you need to switch between amps or instruments during a live performance, let the INSTRUMENT/AMP SELECTOR AB100 be your personal light-speed stagehand. This must-have stomp box features a primary INPUT, a dedicated OUTPUT and an additional output that can double as a second input. Just flip the MODE switch to determine whether you want to use two instruments through one amp or one instrument through two amps. With its two dedicated LEVEL dials, you can determine precisely the volume you want to send to each amp, or the level of the signals from your two instruments. A top-quality on/off switch ensures noise-free, instantaneous operation, and dual LED indicators show which inputs or outputs are activated. You can power the AB100 pedal with either a 9 V battery or our PSU-SB DC power supply (not included). Ultra-flexible 2-mode selector to switch instruments, amplifiers, effects, etc. Easily switch between two input signals to one output or vice-versa (e.g. switch between two guitars using one amplifier or two amplifiers with one guitar) Dedicated Level controls for precise volume adjustment Status LED for effect on/off and battery check Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included) First-class electronic On/Off switch for noise-free operation High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
|
|  |  | | Make sure every cable in your arsenal is in good working order with the invaluable BEHRINGER Cable Tester CT100. This incredibly portable audio solution is a must-have for sound engineers and musicians alike.The CT100 accepts every type of cable you might use in a recording or live performance situation: XLR, mono and TRS phone (1/4", 1/8", TT), RCA and even MIDI. Choose from three modes: cable test mode, installed CABLE TESTER mode and TONE mode. The CT100 can check for continuity, intermittency, phantom power presence and grounded shields. Because this handy tool runs on two AA batteries, you can carry it in your pocket and be ready to troubleshoot at a moment's notice.The Cable Tester CT100 is the smart, portable and unbelievably affordable way to ensure your next show or recording session runs smoothly. It just may become the most important tool in your kit! Three modes: cable test mode, installed cable test mode and test tone mode Accepts XLR, mono and stereo TRS phone ( 1 /4 ", 1 /8 ",TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires two AA alkaline batteries)
|
|  |  | | The LS-2 Line Selector pedal represents the easy way to switch settings among several effects devices or amplifiers, or route input and output signals. Two line loops and six looping modes provide a wide variety of applications.
Compact line selection pedal for connecting and switching between multiple amplifiers and effects devices Provides two line loops with Level control and six looping modes Can supply power to several BOSS compact pedals when used with an AC adaptor The ideal power supply and master switching unit for multiple effects setups BOSS 5-year warranty
|
|  |  | | A robust, heavy duty foot switch for use with effects units and guitar amplifiers. Metal facia with ABS plastic body. Heavy duty metal push switch (latching). 4.2m cable with moulded 6.3mm mono jack plug Dimensions 110 x 100 x 50mm Weight 500g
|
|  |  | | 4 way footswitch to go with the Marshall Haze 40 watt Combo
|
|  |  | | This is an original Marshall spare part.
|
|  | | Marshall's brand new footswitches work with either Valvestate or valve amps.
|
|  | | The Marshall PEDL10008, Single footswitch for changing channels on the amplifier.
Standard single CHANNEL change pedal which works with the majority of amplifiers on the market today.
|
|  |  | | For all MG-FX models optional, Every single button can be an individual role, Copy of switching functions in Switch Mode Store, create presets in the entire program, store mode, Chromatic Tuner (440Hz) with mute, notes display for tuner with Sharp LED, footswitch comes without batteries, connection to the amplifier with a mono-jack cable, factory reset function for programming, footcontroller function remain stored in the Amp
|
|  |  | | FS-6: Dual Footswitch
Features: Two switches in one, Boss new FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for latch or momentary operation. Pick the configuration that best suits your playing style and setup.
Each footswitch can be assigned latch- or momentary-type Stereo input jack for single stereo cable connection Can be connected to other footswitches (FS-5L/FS-5U/FS-6/AB-2) for extension Can be used with a wide variety of instruments, rhythm machines, guitar amps, etc.
|
|  |  | | Foldable amplifier/monitor floor stand - steel tubing construction - base size (WxD): 27 x 46 cm (10 5/8 x 18 in.) - main frame(WxD): 30 x 30 cm (11 3/4 x 11 3/4 in.) - support frame(WxD): 23 x 21 cm (9 x 8 1/4 in.) - size when folded: 64 x 30 x 4 cm / 25 1/4 x 8 1/4 x 1 9/16 in.) - load capacity: 40 kg (88 Lbs) - weight: 2,0 kg (4 3/8 Lbs)
|
|  |
Online Catalogue | Amplification | Amplification Accessories |
|
| |